How to Make a Necklace Chain With Wire?

Making a necklace chain with wire is a simple and fun project that can be customized to suit your style. 

All you need is your desired type of wire and a little bit of know how to make it. You can choose between silver wires or copper wires.

How to Make a Necklace Without a Chain?

Making a necklace without a chain is actually quite easy! All you need is some wire and some beads. You can use any type of bead, including glass, metal, or even plastic.

  • First, simply string the beads onto the wire, leaving enough room at the end to create a loop
  • Once all of the beads are on, twist the wire to secure them in place. 
  • Then, create a loop at one end of the wire and connect it to the other end.

That's it, you've now made a beautiful necklace without using a chain!

necklace mega sale up To 50% off

How to Make a Chain Necklace With Pendant?

Making a chain necklace with pendant is easy and only requires a few supplies. 

You will need:

  • A chain (You can find these at any craft store).
  • Jump rings (These connect the different parts of the necklace together).
  • Pendant (Again, you can find these at any craft store).
  • Wire cutters (To cut the jump rings).
  • Pliers (To open and close the jump rings)


Step-1: Start by cutting two pieces of chain. One piece should be about 18 inches long, and the other should be about 24 inches long.

Step-2: Using your wire cutters, open up a jump ring and thread it through one end of the 18 inch chain and then through the loop on the pendant. Close the jump ring back up. 

Step-3: Open up another jump ring and thread it through one end of the 24 inch chain and then through the first jump ring that is attached to the pendant. Close this second jump ring back up as well. 

Step-4: Now you should have one long piece of chain with your pendant hanging in the middle! To finish off the necklace, simply attach a clasp to each end of the chain using yet more jump rings. 

And that's it! your chain with pendant is ready for use.

How to Make a Necklace Chain With Wire?

How to Make a Necklace Chain With Wire

Here’s are the instructions for making a necklace with wire:

The first step is to measure out the length of wire that you will need. It is important to make sure that the wire is long enough to go around your neck comfortably, with a little bit of extra to spare. Once you have the length measured out, use your pliers to cut the wire cleanly.

Next, use your pliers to create a small loop at one end of the wire. This loop will eventually be used to attach the clasp. Once you have created the loop, thread the other end of the wire through it so that it forms a complete circle.

Now it's time to start adding in the beads! Begin by threading a bead onto the wire, then create another loop right next to it. Continue adding beads and loops until you have reached your desired length. When you are happy with the number of beads, use your pliers to create one final loop at the end of the chain.

Lastly, all that's left to do now is attach the clasp. There are many different types of clasps available, so chose whichever one you like best. Using your pliers, carefully open up the loop at the end of the chain and hook it onto one side of the clasp. Then do the same with the loop at the beginning of the chain, and your necklace is complete! 

How to Make a chain for Necklace?

When it comes to necklace making, one of the most important things you need is a good quality chain. Without a strong and sturdy chain, your necklace will not be able to withstand wear and tear and will eventually break. There are many different types of chains available on the market, so it is important to choose one that is right for your project.

How to Make a chain for Necklace

Here is a guide to help you select the perfect chain for necklace making

  • First step, decide what type of metal you want your chain to be made from. The most popular options are sterling silver, gold-filled, and rose gold-filled. Each metal has its own benefits and drawbacks, so it is important to select the one that best suits your needs. 
  • Next step, consider the thickness of the chain. If you are making a delicate necklace, you will want to choose a thinner chain so that it does not overpower the design. However, if you are looking for a more substantial piece, then a thicker chain may be better suited. 
  • Final step, take into account the length of the chain. You will need enough length to thread through all of the beads or pendants you plan on adding to your necklace; otherwise it will be too short and will not lay correctly when worn.

With these factors in mind, select the perfect chain for your next necklace making project!

How to Make Necklace from Bulk Chain?

If you're looking for a fun and easy jewelry project, try making your own necklace from bulk chain. This is a great way to use up leftover chain or to create a unique piece of jewelry. 

Here's what you'll need

  1. Bulk chain (I used 18 inches).
  2. Jump rings (I used 6).
  3. Lobster clasp.
  4. Wire cutters.
  5. Needle nose pliers. 

First, start by cutting your bulk chain into six 3 inch pieces using wire cutters.

Next, use needle nose pliers to open three jump rings. Slide one jump ring through the end loop of two pieces of chain and then close the jump ring.

Then, repeat this step until all six pieces of chain are attached together in a circle.

Lastly, it's time to add the lobster clasp. Open another jump ring and slide it through the end loop of one piece of chain. Then add the lobster clasp to the jump ring and close it.

Your necklace is now complete!

special offer - upto 50% off on necklace

How to Make a Chain Necklace With Beads?

Making a chain necklace with beads is a fun and easy project that anyone can do! All you need are some basic supplies and a little bit of patience.

Here's how to do it:

  • First, string your beads onto the headpins. You can make each bead link as long or as short as you'd like, just be sure to leave enough wire at the end to create a loop. 
  • Once all of your beads are on the headpin, use your wire cutters to trim off any excess wire, then use your needle nose pliers to create a small loop at the end of each headpin. 
  • Next, it's time to start connecting everything together! Open up a jump ring and thread it through the loop on one of your bead links. 
  • Then, close the jump ring back up, being careful not to twist it too tight (this can make it difficult to open later on). 
  • Lastly, repeat this process until all of your bead links are connected together into one long chain.

And that's it! Your new chain necklace is finished and ready to wear. Have fun experimenting with different bead colors and patterns, there are endless possibilities!

How to Make Simple Chain Necklace - Basic Guide 503

Wrap Up

So, this was how you can make a necklace chain with the help of wire. You just need some colorful wire and some creativity to design your own necklace. We hope you can use the discussed guidelines and make you own wired necklace with ease.

necklace flash sale offer upto 50% off