How to Fix Broken Chain Necklace?

When it comes to jewelry, nothing is more delicate than a chain necklace. One little snag and the whole thing can come tumbling down. If you have a broken chain necklace, don't worry! It is possible to fix it yourself.

Take a small piece of wax paper and fold it in half. Then, place the broken necklace chain inside the wax paper and fold it closed. Use a hair dryer on medium heat to melt the wax paper until it covers the chain completely. Remove the melted wax paper and let the chain cool. You're done!

Can You Fix a Snapped Necklace Chain? 

If your necklace chain has snapped, don't despair! With a few simple tools and a little bit of know-how, you can fix it good as new.

Can You Fix a Snapped Necklace Chain

First, gather your materials. You'll need two jump rings (one small, one large), needle nose pliers, wire cutters and your broken necklace chain. 

If your chain is particularly delicate or valuable, you may also want to use jewelry soldering supplies and a torch to fuse the jump rings shut. 

Next, use the wire cutters to snip off any sharp ends on the broken chain links. This will help prevent you from getting scratched or poked while working. 

Now it's time to reattach the broken links. Open up the small jump ring with the needle nose pliers and thread it through one side of a broken link.

After that, close the jump ring back up again. Repeat this process with the large jump ring on the other side of the broken link, then connect the twojump rings together. 

Your chain should now be repaired! If you're worried about your repair being strong enough, you can always solder the jump rings shut for extra security. Just be sure to use heat-resistant gloves and work in a well-ventilated area if you go this route.

necklace sale offer - upto 50% off

Can a Broken Thin Necklace Chain Be Fixed? 

Every woman's closet has that one dainty necklace that they never wear because the chain is too delicate and always breaks. But, before you get rid of it or continue to try unsuccessfully to fix it with a pair of pliers, consider this 5-step process that will have that necklace back in your rotation in no time. 

Can a Broken Thin Necklace Chain Be Fixed?

The first step is to gather your materials. You will need a needle and thread, a pair of scissors, and a jump ring. A jump ring is a small, metal circle with a split in it. They are very easy to close and open, making them perfect for this repair. 

Next, cut off any excess chain from the broken end using your scissors. You want to leave about an inch of chain beyond the point where it broke. Thread your needle and tie a knot at the end of the thread. 

Then, poke the needle through the end of the chain and come out through thejump ring. Pull the thread tight so that the jump ring is close to the end of the chain. 

Now, poke the needle back through the jump ring and pull it through until you have a loop. This loop will act as an extra measure to keep your jump ring from opening up and falling off. 

To finish this step, poke the needle back through the loop you just created and pull tight. You can do this as many times as you feel necessary to make sure your jump ring is secure. 

The last step is to trim away any excess thread, being careful not to cut any of the links in your chain. Your necklace is now repaired and ready to be worn!

How Much Does It Cost to Fix a Broken Chain on a Necklace? 

If your necklace has a broken chain, the first thing you'll need to do is determine what type of chain it is. 

How Much Does It Cost to Fix a Broken Chain on a Necklace

The most common types of chains are made from either gold or silver. Once you know what type of metal your chain is made from, you can take it to a jeweler to have it repaired.

Gold chains can typically be repaired for around $30-$50, depending on the severity of the break and the length of the chain. Silver chains tend to be less expensive to repair, with most repairs falling in the $10-$20 range.

Can a Broken Silver Chain Be Fixed? 

A broken silver chain can be fixed in a number of ways, depending on the severity of the break. If the break is clean and the two ends are still attached, then the chain can usually be reconnected using a jump ring. 

If the break is jagged or the ends are not attached, then the chain will need to be cut and a new clasp attached.

How Do You Fix a Broken Chain Link? 

If your chain link fence is sagging or has gaps, it's probably because the posts have shifted. To fix this: 

First, check to see if the posts are still securely in the ground. If they are, then you'll need to tighten or replace the hardware that secures them.

If the posts are not securely in the ground, you'll need to reset them. To reset a post, first remove any concrete footing around it with a shovel. 

Next, use a hand auger to dig a hole next to the post that's at least two feet deep.

Finally, pour concrete into the hole and set the post in it. Once the concrete has cured, you can reattach your fencing panels.

necklace super sale upto 50% off

How to Fix a Broken Rope Chain Necklace?

If your rope chain necklace has broken, there's no need to panic. With a little bit of patience and the right tools, you can easily fix it yourself. 

Here's what you'll need: 

  • A length of thin wire 
  • Needle nose pliers 
  • Wire cutters 

Instructions

  1. Using the wire cutters, snip off any excess wire that is sticking out from the break. This will help prevent the wire from poking you later on. 
  2. Thread the end of the wire through the needle nose pliers so that about an inch is sticking out.
  3. holding both ends of the wire, twist the pliers in opposite directions to create a small loop. The loop should be just big enough to fit snugly around one of the links in your chain.
  4. Now take one end of your broken chain and attach it to this loop (it helps to use needle nose pliers for this as well).
  5. Once both ends are attached, give the wires a few twists so they're nice and tight against the links, then trim off any excess with your wire cutters.

How to Fix a Broken Necklace Chain?

Wrap Up

A chain necklace is a great piece of jewelry to wear because it can dress up any outfit. They are also very versatile- you can wear them alone or with other necklaces. But, like all jewelry, they require some care and cleaning from time to time. 

If your chain necklace has broken, don't despair! There are a few easy ways to fix it at home. With a little bit of patience, your necklace will look as good as new in no time.

necklace flash sale offer upto 50% off