How Much Does It Cost to Make a Necklace Longer?

Re-stringing a beaded necklace will usually cost less than buying new beads and adding them on. If your local jeweler doesn't offer this service, there are plenty of online companies that specialize in re-stringing bead necklaces. So how much does it cost to make a necklace longer?

It depends on the type of necklace, the length you want it to be, and the materials used. Typically, the cost of making a necklace longer will range from $3-$300.

The cost of adding extra length will also depend on the type of chain your necklace is made from. A simple gold or silver chain can be lengthened for just a few dollars, but if your necklace has multiple strands or is made with more expensive materials, the cost will be higher.

The same goes for the type of clasp a simple lobster claw clasp is easy (and cheap) to replace, but if your necklace has a more complicated closure system, it will likely be more costly to lengthen.

Can I Make My Necklace Longer?

Yes, you can make your necklace longer! There are a few different ways to do this:

Can I Make My Necklace Longer

Use a Jewelry Extender

These are small chains that attach to the end of your necklace and add a few extra inches. They come in different colors and styles, so you can find one that matches your necklace perfectly.

Add some Jump Rings

Jump rings are small metal loops that connect two pieces of jewelry together. You can open them up, slide them onto your necklace, and then close them back up again. This is a great way to add a little bit of length without changing the look of your necklace too much.

Get a new Chain

If you want to add a significant amount of length to your necklace, you'll need to get a new chain. The good news is that there are lots of different styles and lengths available, so you should be able to find one that suits your needs perfectly.

Can a Jeweler Make a Necklace Longer?

If you need a necklace lengthened, a jeweler can do it for you. The process is simple and only takes a few minutes.

First, the jeweler will measure the length of the necklace and determine how much needs to be added.

mega sale up To 50% off Limited time offer

They will then add an extension chain to the end of the necklace. The new chain will be hooked onto the existing clasp, and the excess will be trimmed off.

Finally, the jeweler will test the strength of the new connection and make any necessary adjustments.

How Do You Extend a Necklace That is Too Short?

You finally found the perfect necklace to match that stunning dress you've been dying to wear. The only problem is, the necklace is just a bit too short. You could go necklace shopping again, but you're running out of time and patience. Luckily, there are a few easy ways to extend a too-short necklace.

One straightforward way to add length to a necklace is by adding extender chains. Extender chains are small lengths of chain that attach to the existing necklace and add a few extra inches. You can find extender chains at most jewelry stores, or even make your own using some jump rings and extra chain.

Another way to extend a necklace is by tying a small piece of string or fishing line around the existing clasp. Then, tie on some beads, charms, or other decorative elements to add length. This method is great if you want to really customize your look.

Finally, you can also simply double up the necklace. This works best with longer necklaces that have a thin chain. Simply put the necklace over your head, then loop it around once more before attaching the clasp. This will give you an instant boost of length without having to make any alterations.

With these easy tricks, you can take any too-short necklace and make it work for your outfit. So next time you go jewelry shopping, don't be afraid to try on those shorter pieces. With a little creativity, they can be perfect for any occasion.

How Do You Change the Length of a Necklace?

If you need to change the length of your necklace, there are a few easy ways to do it at home. With a few simple tools, you can add or remove links to adjust the length of most necklaces.

What you'll need:

How Do You Change the Length of a Necklace
  • Needle nose pliers
  • Jump rings (optional)
  • A friend (optional)


  1. Measure the necklace against your neck to see how many inches or centimeters longer or shorter you need it to be.
  2. If you need to make the necklace longer, use needle nose pliers to open a jump ring and slide it through one end of the necklace and then through the other. Close the jump ring securely. Repeat as necessary until the desired length is achieved. You can also add extra links if needed by opening and closing jump rings in between two existing links.
  3. If you need to make the necklace shorter, simply remove some links using needle nose pliers until it is at the desired length. You can also remove an entire section of links by cutting them out with wire cutters, although this will leave sharp edges so be careful not to cut yourself when putting on or taking off the necklace later. 

How to Lengthen a Necklace? 

Necklaces are one of the most versatile pieces of jewelry. They can be worn long or short, depending on the outfit and the occasion. But what if your favorite necklace is too short?

Don't worry, there are a few easy ways to lengthen it.

One way to lengthen a necklace is to add an extender chain. Extender chains come in a variety of lengths, so you can choose one that will give you the look you want.

Super Sale up to 50% off

Simply attach the extender chain to the clasp of your necklace and voila! Your necklace is now longer.

Another way to lengthen a necklace is to add jump rings. Jump rings are small metal loops that connect two pieces of jewelry together. To use them, simply open up the jump ring with pliers and attach it to both ends of your necklace. You can add as many jump rings as you need to get the desired length.

If you're looking for a more permanent solution, you can always have your necklace professionally lengthened by a jeweler. This option will usually involve adding new links or clasps to your necklace, so it's best left to someone who knows what they're doing. But if you're confident in your ability (or willing to take a risk), feel free to give it a try yourself!

How Much Does It Cost to Fix a Gold Necklace? 

When it comes to repairing a gold necklace, the cost will vary depending on the severity of the damage. For example, if the chain is simply broken, then the repair will be relatively inexpensive. However, if the necklace is severely damaged or bent out of shape, then the repair costs will be significantly higher.

In most cases, you can expect to pay anywhere from $50 to $100 to have a gold necklace repaired. However, if your necklace is particularly valuable or sentimental, then you may want to consider taking it to a jeweler who specializes in antique jewelry repairs.

These specialists may charge more for their services, but they will likely do a better job of restoring your necklace to its original condition.


If you need to make a necklace longer, it typically costs between $5 and $15. The price will depend on the type of necklace and how many links need to be added.

Big Sale up to 50% off