Can You Get Links Taken Out of a Necklace?

If you have ever had a link come out of your necklace, you know how frustrating it can be. You may be wondering if there is anything you can do to get the links taken out so that you can wear your necklace again. 

Yes - it is possible to get links taken out of a necklace, but it will depend on the type of clasp used and the condition of the links. If the necklace has a spring ring clasp, then it should be possible to remove the links without too much difficulty. 

However, if the necklace has a lobster claw clasp or another type of closure that requires a tool to open, then it may be more difficult to take the links out. In addition, if the links are rusted or corroded, then they may not come apart easily.

While it is possible to get the links taken out, it is not always an easy process.

How Much Does It Cost to Take Links Out of a Necklace?

If you have a necklace that you no longer wear, or one that is damaged and needs to be repaired, you may be wondering how much it will cost to take the links out. 

special offer sale upto 50% off on all jewelry items

 The answer depends on a few factors, such as the type of necklace, the number of links that need to be removed, and whether you plan to have a professional jeweler do the work or if you're comfortable doing it yourself. Generally speaking, removing links from a necklace is not an expensive repair.

If you have a simple chain with just a few links that need to be removed, you can expect to pay around $10-$20 for the service. 

However, if your necklace is more elaborate or has many more links that need to be taken out, the price will increase accordingly. For example, removing all of the links from a long pearl necklace could cost upwards of $100.

If you're comfortable working with jewelry and small tools, it's actually quite easy to remove links from most types of necklaces at home. All you'll need is a pair of needle-nose pliers and some patience! Just remember to take your time so you don't damage the rest of the necklace in the process.

Can You Take Links Out of a Necklace?

Making your own jewelry can be a fun and rewarding experience, but it often requires knowledge of specialized techniques. One common question is whether it's possible to remove links from a necklace chain. 

Can You Take Links Out of a Necklace

The answer depends on the type of metal used in the chain. Sterling silver and gold chains can be resized by a jeweler, but steel or titanium links cannot be removed without causing damage to the metal. 

However, there are some home methods that can be used to remove links from steel or titanium chains. One is to use pliers to twist open the link. This method is not recommended for sterling silver or gold chains, as it can damage the metal. 

Another method is to use a hammer to gently tap on the link until it comes apart. This method is also not recommended for sterling silver or gold chains, as it could break the metal. The best way to resize a sterling silver or gold chain is to take it to a jeweler who can remove and add links as needed.

Can a Jewelry Store Shorten a Necklace?

It's a common request at jewelry stores: can you shorten my necklace? And the answer is usually yes! Whether your necklace is too long or too short, most jewelry stores will be happy to adjust the length for you. But how do they do it?

The first step is to remove the clasp. This can be done with a simple pair of pliers. Next, the jeweler will measure how much needs to be removed in order to achieve the desired length. 

Once they have the measurement, they will mark the spot on the necklace with a pen or pencil. Then, using a pair of wire cutters, they will carefully snip the excess off of the necklace. 

Finally, they will re-attach the clasp and polish the new end of the necklace to ensure a smooth finish. And that's all there is to it! Whether you need a few inches taken off or a couple of feet, most jewelry stores will be able to accommodate your request. 

So next time your necklace is giving you trouble, don't hesitate to ask for a little help.

How Do You Shorten a Link in a Necklace?

If you need to shorten a link in a necklace, there are a few different ways that you can do so. One way is to use a pair of pliers to gently squeeze the link closed. Another way is to use a jeweler's saw to carefully remove a small portion of the link.

How Do You Shorten a Link in a Necklace

When you wear a necklace, the last thing you want is for it to be too long and getting caught on things. Or, on the flip side, you don't want it to be so short that it's choking you. 

The good news is, there's an easy way to fix either problem: by adjusting the length of the chain. Here are five simple steps to shorten a necklace chain:

  1. Using a pair of jewelry pliers, open up the jump ring that attaches the end of the chain to the rest of the necklace.
  2. Slide out the length of chain that you want to remove.
  3. Close up the jump ring, making sure that it's securely fastened.
  4. Trim off any excess chain, using wire cutters if necessary.
  5. Reattach the end of the chain to the rest of the necklace using a new jump ring. And that's it! 

By following these steps, you can easily adjust the length of your necklace chain to get the perfect fit.

How to Fix a Broken Necklace Chain?

How to Shorten a Chain Necklace Without Cutting It?

If your necklace is too long and you don't want to cut it, there are a few ways to shorten it without damaging the chain. One way is to use a jump ring. Open the jump ring with two pairs of pliers and attach it to one of the links near the clasp.

Then, close the jump ring. You can also add an extension chain to the back of your necklace. Attach a small piece of chain (about 2 inches) to the back using a jump ring or split ring.

Finally, reattach your clasp to this new link. If you don't have any jewelry making supplies on hand, you can also try knotting the excess chain. Make sure you knot it tightly so that it doesn't come undone.

How to Fix a Thin Necklace Chain?

If your necklace chain is looking a little worse for wear, there are a few easy ways to fix it. With a little bit of time and effort, you can have your necklace looking as good as new in no time! One way to fix a thin necklace chain is to simply add an extender.

necklace mega sale offer up To 50% off

This will give the appearance of a thicker chain, and can be easily removed when you want to wear the necklace without the extender. If you don’t want to use an extender, another option is to add some links back into the chain. You can do this by using jump rings or split rings.

Simply reattach the broken links and your necklace will be as good as new! If your necklace has more serious damage, such as a broken clasp, you may need to take it to a jeweler for repairs. However, if the damage is minor, these simple tips should help you get your favorite necklace back in working order in no time!

How to Resize a Chain Necklace?

One of the most common questions we get here at our jewelry store is, "How do I resize my chain necklace?" It's a great question, and one that doesn't have a straightforward answer since there are so many different types, styles, and sizes of chain necklaces out there. But don't worry - we're here to help!

How to Resize a Chain Necklace?

In this blog post, we'll walk you through the steps on how to resize a chain necklace so that it fits perfectly around your neck. 

First things first - before you start resizing your necklace, it's important to determine what size you need it to be. The best way to do this is by measuring your neck with a tape measure or a string.

Once you have your measurement, add 1-2 inches to that number so that you have some wiggle room when wearing the necklace. For example, if your neck measures 14 inches, you'll want to resize the necklace to 16 inches or 18 inches. Now that you know what size you need the necklace to be, it's time to start resizing!

Depending on the type of chain necklace you have (e.g., gold filled, sterling silver), there are different methods for resizing. 

We recommend taking your necklace to a professional jeweler who can quickly and easily resize it for you while ensuring that the quality of the piece is maintained. However, if you're feeling adventurous and want to try resizing the necklace yourself, here are some instructions.

If your chain has an open end link: Using needle nose pliers, gently pull apart two links until they come unhooked from each other. 

Then reattach them together at the desired length (making sure both links are hooked onto each other). Repeat this process until all links are shortened or lengthened as desired.

Finally close up any open ends using needle nose pliers so that they're secure. If your chain has soldered jump rings.

Using wire cutters (or strong scissors), carefully snip off excess jump rings until only those needed remain at the desired length of the chain. Be careful not to cut too close - leave about 1/8 inch on either side just in case!

If necessary (i..e., if there aren't enough jump rings left on one side), add new jump rings by opening up an existing ring with needle nose pliers and attaching it onto both ends of another ring (creating a loop). 

Conclusion

If you're wondering whether you can get links taken out of a necklace, the answer is yes! Most jewelers will be able to do this for you, although it may cost a bit of money. The process is usually pretty straightforward and only takes a few minutes. 

necklace flash sale offer upto 50% off