Can You Get a Necklace Shortened?
A shorter necklace will sit higher on your neck and may feel tighter than a longer one. So, can you get a necklace shortened?
Yes, most jewelers will be able to shorten a necklace for you. However, it's important to keep in mind that if the necklace is made with precious metal or gemstone, the shortened length may not be as valuable as the original length.
If you're only interested in having the necklace shortened by a few inches, most jewelers should be able to do this without any problems.
However, if you need a significant amount of length taken off the necklace, it may be necessary to send it away to a specialist who can properly shorten it without damaging the delicate chain or gems.
How to Shorten a Chain Necklace Without Cutting It?
If your necklace is starting to feel a little bit too long, there's no need to cut it! You can easily shorten a chain necklace without having to cut it.
- Find the spot on the chain where you want it to be shorter.
- Using a pair of pliers, carefully bend the link above that spot so that it is pointing downwards.
- Using your other hand, hold onto the end of the chain and gently pull until the link pops out.
- Close the now empty link back up with your pliers so that it looks new again.
- You've now shortened your necklace without cutting it!
How to Shorten a Thin Necklace?
One of the most common questions we get here at Beadaholique is "How do I shorten a thin necklace?" It's actually a very easy process, but there are a couple things you need to keep in mind. In this blog post, we'll show you how to shorten a delicate necklace using two simple knots.
First, you'll need to gather your supplies. For this project, you'll need:
- A thin necklace (we used one that was about 18 inches long)
- Tape measure or ruler.
Then, start by measuring how long you want your shortened necklace to be. Once you have your desired length, add about 1/2 inch to that measurement. This extra half inch will allow for the knotting that we'll be doing later on.
After, cut your necklace at the desired length plus the extra half inch, and set aside the excess chain.
Next, take one end of the chain and thread it through the loop at the other end of the chain. Pull it until there is about an inch of slack, then make a small loop (or what's called a "lark's head" knot).
Tighten up the loop by pulling on both ends of thechain - be careful not to pull too tight or else your knot will come undone.
Repeat this step with the other end ofthe chain so that both ends are now knotted together.
Where Can You Get Your Necklace Chain Shortened?
You wear your necklace every day, but have you ever stopped to think about where you got it or how it was made?
If you're like most people, the answer is probably no. But the truth is, your necklace probably has a long and fascinating history that extends far beyond the jewelry box.
Here's a quick guide to the history of necklaces and where you can get your necklace chain shortened.
The earliest necklaces were made of plant materials like vines and leaves. These organic materials were often intertwined with each other to create intricate designs.
Later, necklaces were made with more durable materials like bone, ivory, and metal. The first metal necklaces were likely made of copper and bronze, which were widely available in ancient times.
Over time, other metals like silver and gold became more popular. Today, there are many different ways to get your necklace chain shortened. You can take it to a jeweler or a tailor, or even do it yourself at home.
No matter how you choose to do it, be sure to take care of your necklace so that it will last for generations to come.
How to Find Necklace Shortening Near You?
If you're in need of necklace shortening, there are plenty of options near you. Many jewelers offer this service, and it's usually a quick and easy fix.
Simply take your necklace to the jeweler and they will shorten it to your desired length. There are a few things to keep in mind when having your necklace shortened.
- First, be sure to communicate exactly how much shorter you want the necklace to be.
- Second, keep in mind that some materials can't be cut and will need to be re-strung if you want them shortened.
- Finally, be aware that some jewelers may charge a small fee for this service.
Overall, getting your necklace shortened is a simple process that can be done at most jewelry stores. Be sure to know exactly what you want before heading in, and don't forget to ask about any fees upfront.
How to Shorten a Necklace?
If you have a necklace that is too long, there are a few ways that you can shorten it.
- One way is to simply remove some of the links from the chain. This can be done with a pair of pliers.
- Another way is to knot the necklace at the desired length. This works best with a thicker chain.
- Finally, if you have a clasp that is adjustable, you can move it to make the necklace shorter.
Can You Make a Necklace Shorter?
If you need to make a necklace shorter, there are a few options available to you.
You can either remove some of the links from the chain or use a jump ring to attach the clasp to a different location on the chain.
If your necklace has a lobster claw clasp, you can also simply adjust the length of the necklace by moving the slider on the back of the clasp.
How Much Does It Cost to Get a Chain Shortened?
The price of having a chain shortened will depend on the jeweler you visit and the type of chain you have.
A simple, thin gold chain could cost as little as $20 to shorten, while a thicker, more ornate gold chain could cost upwards of $100.
Silver chains will generally be less expensive than gold ones, but the price will still depend on the thickness and intricacy of the design.
Platinum chains will be the most expensive to have shortened, with prices starting at around $200.